Maho 500 C - Fresadora CNC - 1983
Especificaciones
| Fabricante | MAHO |
| Modelo | 500 C |
| Año | 1983 |
| Condición | Usado |
| Fabricado en | Alemania |
| Unidad de control | Philips 432/10 |
| Horas de trabajo | + -18800 |
| Recorrido del eje X | 500 mm |
| Recorrido del eje Y | 400 mm |
| Recorrido del eje Z | 300 mm |
| Mesa de trabajo | 700 x 350 mm |
| Cono del husillo | ISO 40 |
| Recorrido del husillo vertical | 50 mm |
| Velocidad del husillo | 20-4000 rpm |
| Rango de avance | 1-3000 mm/min |
| Avance de travesía | 5 m/min |
| Capacidad de carga de la mesa | 250 kg |
| Requerimiento total de potencia | 11.3 kW |
| Dimensiones | L 2100 x W 2000 x H 2000 mm |
| Peso | 2000 Kg |
| Disponibilidad | Inmediata |
| Observaciones | *¡La información puede ser a veces inexacta y cambiar sin previo aviso! |
Descripción
Metalworking - CNC Milling
Used Maho – 500 C from 1983 is made in Germany, with working hour + -18800 H. This CNC milling is equipped with a control unit Philips 432/10. The machine has a work table 700 x 350 mm, total power requirement 11.3 kW and is equipped with the following:
The original heidenhain 271 rod has been replaced by a heidenhain 780
The 432/10 is equipped with a drip feed. This makes it possible to load files from the computer, so you don't suffer from limited memory.
- with all books, cable diagrams, both digital and analog.
Also, I have many spare parts with the machine.
- all servo drives (x, y, z, b and spindle)
-full control (432/9)
-remote control
-all glass rulers
- The machine is sold without tool holders, but can be purchased at an additional cost. The same applies to a very neat hydraulic machine clamp.
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*