Biesse Skipper 130 - CNC Bewerkingscentra - 2008
Verkocht
Specificaties
| Fabrikant | BIESSE |
| Model | Skipper 130 |
| Jaar | 2008 |
| Conditie | Gebruikt |
| Gemaakt in | Italië |
| Besturingseenheid | Biesseworks |
| X-as verplaatsing | 3000 mm |
| Y-as verplaatsing | 1300 mm |
| Z-as verplaatsing | 90 mm |
| Hoofdmotorvermogen | 4,5 kW |
| Groep verticale gaten in X- Y | 62 mm |
| Aantal freesassen | 2 |
| Spiltoerental | 24000 rpm |
| Groep gaten in horizontale richting X | 16 |
| Groep gaten in verticale richting in Y | 4 |
| Totale stroomvoorziening | 24 kW |
| Afmetingen | L 7900 x B 4800 x H 2200 mm |
| Gewicht | 3000 kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving wijzigen! |
Beschrijving
Metalworking - CNC Machinig Centers
Used Biesse – Skipper 130 from 2008 is made in Italy. This CNC machining center is equipped with a control unit Biesseworks. The machine has Main motor power 4.5 Kw. and is equipped with the following:
- Machine table with continuous feeding device.
- Special fixing system.-Pliers.
- Command of the machine by computer.
- Slot saw in direction "X".
- DXF interface.
- Output of conveyor belt.
- CE regulations
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*