HAAS TM-2P - Verticaal bewerkingscentrum - 2017
Specificaties
| Fabrikant | HAAS |
| Model | TM-2P |
| Jaar | 2017 |
| Conditie | Gebruikt |
| Gemaakt in | VS |
| Besturingseenheid | HAAS |
| X-as reis | 1016 mm |
| Y-as reis | 406 mm |
| Z-as reis | 406 mm |
| Tafellengte | 1466 mm |
| Tafelbreedte | 267 mm |
| Tafellast | 159 kg |
| Motorvermogen | 5.6 kW |
| Spiltoerental | 6000 rpm |
| Spilkegel | CT 40 |
| Gereedschapswisselaar | 10 posities |
| Voltage | 400 V |
| Afmetingen | L 3300 x B 1980 x H 2510 mm |
| Gewicht | 2295 kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving veranderen! |
Beschrijving
Metalworking - Vertical Machining Center
Used HAAS industrial machinery – TM-2P from 2017 located in Poland. This vertical machining center is equipped with a control unit HAAS and has a working area of 1466 x 267 mm, 6000 rpm spindle speed and motor power of 5.6 kW.
More info:
Machine with:
- Memory capacity of 1 GB
- Network card
- Early power failure detection module
- 15" LCD monitor and USB connection
- Electronic knob
- Coolant pump kit
- Visual programming system
- 10-position magazine
- Protective cover for the work surface
- Installation for compressed air connection
- Documentation of the machine /1 English copy, 1 Polish copy/.
Selected options: (Renishaw brand wireless probe):
- AUGER - Screw chip ejector
- WIFI - Wireless network
- WIPS-R - Cable-free probe set for radius and length tooling, part measurement and alignment, along with measuring cycles. Includes SO, MACRO, COORD and VPS (Visual Programming System).
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*