Realmeca RV-2 5A - Vertical Machining Center - 2001
Specifications
| Manufacturer | Realmeca |
| Model | RV-2 5A |
| Year | 2001 |
| Condition | Used |
| Made in | France |
| Control unit | Heidenhain 426 |
| X-Axis travel | 250 mm |
| Y-Axis travel | 250 mm |
| Z-Axis travel | 250 mm |
| B-Axis travel | 110° |
| C-Axis travel | 360000 x 0.001° |
| Table length | 460 mm |
| Table width | 250 mm |
| Spindle speed | 50000 rpm |
| Spindle taper | HSK E25 |
| Motor power | 3.3 kW |
| Tool magazine | 18x |
| Max. tool length | 120 mm |
| Working feed | 0-5 m/min |
| Rapid feed | 5 m/min |
| Dimensions | L 1790 x W 1405 x H 1795 mm |
| Weight | 2100 kg |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Description
Metalworking - Vertical Machining Center
Used Realmeca industrial machinery – RV-2 5A from 2001 located in Spain. This vertical machining center is equipped with a control unit Heidenhain 426 and has a working area of 460 x 250 mm, 50000 rpm spindle speed and motor power of 3.3 kW.
More info:
Machine with blum tool breakage control, oil mist suction, cabin air filtration, Waldmann lamp, warning light, oil mist system, probe cycle, network cable, post pro, programming software, automatic lubrication, oil cooling and 2x air supply for palletizing system.
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*