Maho 500 C- CNC MIllling - 1983
Specificaties
| Fabrikant | MAHO |
| Model | 500 C |
| Jaar | 1983 |
| Conditie | Gebruikt |
| Gemaakt in | Duitsland |
| Besturingseenheid | Philips 432/10 |
| Werkuren | + -18800 |
| X-as verplaatsing | 500 mm |
| Y-as verplaatsing | 400 mm |
| Z-as verplaatsing | 300 mm |
| Werktafel | 700 x 350 mm |
| Spindelopname | ISO 40 |
| Slag van de verticale spindel | 50 mm |
| Spindelsnelheid | 20-4000 rpm |
| Voedingsbereik | 1-3000 mm/min |
| Voedingstraverse | 5 m/min |
| Tafelbelastingscapaciteit | 250 kg |
| Totale vermogensbehoefte | 11.3 kW |
| Afmetingen | L 2100 x B 2000 x H 2000 mm |
| Gewicht | 2000 kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving worden gewijzigd! |
Beschrijving
Metalworking - CNC Milling
Used Maho – 500 C from 1983 is made in Germany, with working hour + -18800 H. This CNC milling is equipped with a control unit Philips 432/10. The machine has a work table 700 x 350 mm, total power requirement 11.3 kW and is equipped with the following:
The original heidenhain 271 rod has been replaced by a heidenhain 780
The 432/10 is equipped with a drip feed. This makes it possible to load files from the computer, so you don't suffer from limited memory.
- with all books, cable diagrams, both digital and analog.
Also, I have many spare parts with the machine.
- all servo drives (x, y, z, b and spindle)
-full control (432/9)
-remote control
-all glass rulers
- The machine is sold without tool holders, but can be purchased at an additional cost. The same applies to a very neat hydraulic machine clamp.
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*