Nicolas correa FPM-60 - Freesmachine - 1993
Specificaties
| Fabrikant | Nicolas correa |
| Model | FPM-60 |
| Jaar | 1993 |
| Conditie | Gebruikt |
| Gemaakt in | Spanje |
| X-as reis | 9000 mm |
| Y-as reis | 5000 mm |
| Z-as reis | 1000 - 1200 mm |
| W-as reis | 200 mm |
| A-as reis | +90º / -100º |
| C-as reis | +/-200º |
| Tafelafmeting | 9000 x 2000 mm |
| Maximaal gewicht op tafel | 15000 x 2 Kg |
| Afstand tussen de staanders | 3000 mm |
| Aantal en breedte van T-gleuven | 8 x 28 x H12 mm |
| Afstand tussen groeven | 250 mm |
| Spiltoerental | 2000 - 4000 rpm |
| Snelle as (X, Y, Z) | 8000 mm/min |
| Snelle as W (stang) | 5000 mm/min |
| As A en C (kop) | 1125º/min |
| Voedingsmotor koppel: (X/Y/Z assen) | 37 Nm |
| Koppel van voedingsmotoren: W-as (as) | 14 Nm |
| Verticale as (diameter/stap) | 63/10 mm |
| Dwarsas (diameter/stap) | 80/10 mm |
| Schachtas (diameter/stap) | 50/10 mm |
| Spilvermogen | 65 Kw |
| Afmetingen | L 14500 x B 9200 x H 6033 mm |
| Gewicht | 80000 Kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving veranderen! |
Beschrijving
Metalworking - Milling Machine
Used Nicolas correa – FPM-60 from 1993 made in Spain located in Spain. This milling machine is equipped with a table size of 9000 x 2000 mm, 2000 - 4000 rpm spindle speed, spindle power 65 kW.
Includes the following:
FRONT CHUCK WITH SHANK
Cone type: ISO 50
Power: 42 Kw
Number of ranges : 2
Rotation speed
*Apart from constant
*At constant power: 20-2000 rpm
(3200Nm) 20-125rpm
(42Kw) 125-2000rpm
SPINDLE WITH HEAD 4TH AND 5TH AXES
Cone type: ISO 50
Power: 15 Kw
Number of ranges : 2
Rotation speed
*Apart from constant
*At constant power from 25-4000 rpm
(573Nm) 25-250rpm
(15Kw) 250-4000rpm
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*