Loroch Evolution K850-M - Verticale Bewerkingscentra - 2018
Specificaties
| Fabrikant | Loroch |
| Model | Evolution K850-M |
| Jaar | 2018 |
| Conditie | Gebruikt |
| Gemaakt in | Duitsland |
| Besturingseenheid | CNC-oplossing K850-T |
| Zaagbladslijpen | Ø (40) 130 - 850 mm |
| Automatisch zaagbladslijpen | Ø (75) 130 - 520 mm |
| Zaagblad afschuinen | Ø (105) 145 - 850 mm |
| Tandsteek | 1 - 40 mm |
| Tandhoogte | max. 17 mm |
| Aantal tanden | 2 - 998 |
| Zaagbladdikte | tot 8 mm |
| Magazijn laadcapaciteit | 40 zaagbladen |
| Aantal assen | 7 |
| Zaagblad | 130- 850 mm |
| Slijpschijf | 3KW. |
| Elektrische aansluitwaarde | 6.5-8.9 kw |
| Vacuümpomp | 6.5 bar bij ca. 36 l/min |
| Zaagbladdiameter, slijplader | 130-520 mm |
| Zaagbladdiameter, handmatig geslepen | max. 130 mm |
| Zaagbladdiameter, afschuinlader | 145-520 mm |
| Zaagbladdiameter, handmatig afgeschuind | 145-max. mm |
| Mogelijke zaagbladgaten in het magazijn | 32-60 mm |
| Mogelijke gaten van het handzaagblad | 25-80 mm |
| Afmetingen | L 2.400 x B 1.700 x H 2.200 mm |
| Gewicht | 2.000 Kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving veranderen! |
Beschrijving
Metalworking - CNC Machining centers
Used Loroch – Evolution K850-M from 2018 is made in Germany. This Machining Centres - Vertical is equipped with a ontrol unit: CNC solution K850-T. The machine has a power motor 6.5-8.9 kw and is equipped with the following:
-Cylindrical grinding of saw blades to rectify existing teeth (can also be used in a limited way for
sharpening circular knives with a cutting angle of 45 °)
-Automatic peripheral speed switching between CBN and DIA grinding wheels
-1 set of operating tools
-High quality powder coating as well as stainless steel sheets.
-Standard paint: support dark gray RAL 7045, light gray door RAL 7047
Standard accessories:
Remote diagnosis via internet connection
-Machine with full enclosure and integrated machine room lighting
-Signal light to show the working status
-Automatic central lubrication
-2 magazine chucks: 50 mm,
magazine accessories diameter: 50 mm, as well as 20 intermediate layers of 180/52 mm
-Device for automatic chamfering of saw blades with regular teeth (saw blade diameter> = 145 mm when
Using saw blade holder F-1477a,> = 105 mm when using programs F-1445a for all
teeth.
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*