Realmeca RV-2 5A - Verticaal bewerkingscentrum - 2001
Specificaties
| Fabrikant | Realmeca |
| Model | RV-2 5A |
| Jaar | 2001 |
| Conditie | Gebruikt |
| Gemaakt in | Frankrijk |
| Besturingseenheid | Heidenhain 426 |
| X-as reis | 250 mm |
| Y-as reis | 250 mm |
| Z-as reis | 250 mm |
| B-as reis | 110° |
| C-as reis | 360000 x 0.001° |
| Tafellengte | 460 mm |
| Tafelbreedte | 250 mm |
| Spiltoerental | 50000 rpm |
| Spilconus | HSK E25 |
| Motorvermogen | 3.3 kW |
| Gereedschapsmagazijn | 18x |
| Max. gereedschapslengte | 120 mm |
| Werkvoeding | 0-5 m/min |
| Snelle voeding | 5 m/min |
| Afmetingen | L 1790 x B 1405 x H 1795 mm |
| Gewicht | 2100 kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving worden gewijzigd! |
Beschrijving
Metalworking - Vertical Machining Center
Used Realmeca industrial machinery – RV-2 5A from 2001 located in Spain. This vertical machining center is equipped with a control unit Heidenhain 426 and has a working area of 460 x 250 mm, 50000 rpm spindle speed and motor power of 3.3 kW.
More info:
Machine with blum tool breakage control, oil mist suction, cabin air filtration, Waldmann lamp, warning light, oil mist system, probe cycle, network cable, post pro, programming software, automatic lubrication, oil cooling and 2x air supply for palletizing system.
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*