HEMBRUG ERGONOMISCH

CNC Lathes

More info: 

Automatic feed (s): Longitudinal and transverse feed Spindle

Nose intake: Camlock

Cone in main spindle: MC5 (in instead of MC4 with a DR1 (L) (S))

Thread cutting: Yes

Bracket gearbox: Yes

Hardened bed: Yes and in good condition! Lower guideway not collapsed or something!

Cone in the tailstock: MC3 (instead of MC2 with a DR1 (L) (S)

Sony digital readout on the longitudinal displacement only -Guard with switch off switch to the spindle

Stop with switch off switch to the spindle motor

Camlock independent four-jaw with reversible jaws

Rapid quick change system with 6 chisel holders -> NEW original Italian Rapid

Quick clamping device for collets

55 piece C5 collet set; 1 to 28mm with a half mm ascending -> NEW

Clamp holder with printing option

Tension rod for the C5 collets

Tension for the tie rod

Fixed goggles

Single goggles

Complete set of change wheels consisting of 16 pieces for all threads, also sprocket 97

Rotating center MC3

Fixed center MC3

Drill chuck MC3

Automatic cooling with hose and nozzle

All the necessary keys

Machine box

Hembrug Ergonomic documentation including 4 books in which everything about turning is elaborated; from beginner to professional!

500 kilograms heavier than the well-known DR1 (L) (S) models from Ai Hembrug.

Emergency

Stop -Camlock three-claw with inner, outer and soft claws, brand Forkardt (diameter 160mm) -> equipped with the system with quick adjustment of the claws, super practical

*Information can sometimes be inaccurate and change without notice!