Daewoo Puma 2500 LSY - CNC Draaibank - 2002
Verkocht
Specificaties
| Fabrikant | Daewoo |
| Model | Puma 2500 LSY |
| Jaar | 2002 |
| Conditie | Gebruikt |
| Gemaakt in | Zuid-Korea |
| Besturingseenheid | FANUC 18i-T |
| X-as reis | 250 mm |
| Y-as reis | 100 mm |
| Z-as reis | 830 mm |
| As B reis | 830 mm |
| C-as graden | 0.001 |
| Maximale draaidiameter | 550 mm |
| Maximale draailengte | 500 mm |
| Draaidiameter op bank | 600 mm |
| Snelle voeding X, Z / Y / B | 20.24 / 7.5 / 30 m / min |
| Spiltoerental | 3500 rpm |
| Subspiltoerental | 6000 rpm |
| Spilvermogen | 22 kW |
| Subspilvermogen | 7.5 kW |
| Stangpitch ø | 76 mm |
| Doorgang subspil ø | 45 mm |
| Aantal revolverposities | 12 |
| Indexeertijd sec | 0.1 |
| Levensgereedschapsnelheid | 5000 rpm |
| Maximaal vermogen gereedschap | 3.7 mm |
| Gereedschapshoogte | 25 mm |
| Afmetingen | L 3493 x B 1705 x H 2060 mm |
| Gewicht | 5100 Kg |
| Beschikbaarheid | Onmiddellijk |
| Opmerkingen | *Informatie kan soms onnauwkeurig zijn en zonder kennisgeving veranderen! |
Beschrijving
Metalworking - CNC Lathe
Used Daewoo industrial machinery – Puma 2500 LSY from 2002 made in South Korea located in Spain. This CNC lathe is equipped with a control unit FANUC 18i-T and has a turning length max 500 mm, 3500 rpm spindle speed, spindle power 22 kW.
Includes the following
- Chip extractor
- Axis C
- Y Axis
- Sub-spindle
- Bar feeder interface
- Three jaw chuck x 2
- Fixed tool holders
- Motorized tool holders
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*