Advanced Filters
Country
Category
Manufacturer
Model
Condition
Price, EUR
Year
Metalworking Machinery ✓ Glomacht offers a wide range of machine tools and metal machinery.
Cutting
Metalworking - Pipe Profiling Cutting Machine
Used Mueller Opladen industrial machinery – RW 80/...
Discover moreMueller Opladen RW 80/1500 mm - Pipe Profiling Cutting Machine - 2008
Norway
- Max clamping through the chuck
- 950 mm
- Min clamping through the chuck
- 80 mm
- Max clamping on the chuck
- 1524 mm
- Max wall thickness for flame cutting
- 90 mm
Milling Machines
CNC Milling machine --- YOM:1991 More info: Contains chuck, chuck and machine clamp. X-Axis travel: 420 mm
Discover moreFEHLMANN PICOMAX 51
Netherlands
- X-Axis travel
- 420 mm
- Y-Axis travel
- 240 mm
- Z-Axis travel
- 120 mm
- Table surface
- 730 x 280 mm
Milling machine CNC -- YOM:1990
More Info:
Fixed table, fully protected cabin, electronic handw...
Discover more
Milling machine
Table can be rotated at an angle.
Protective cover with switch (working conditi...
Discover moreFEXAC UNIVERSAL UE
Netherlands
- Table dimensions:
- 1100x240mm
- Course along:
- 630mm
- Course across:
- 240mm
- Heading height:
- 500mm
*Turning and milling machine ! Centre height: 140 mm | Swing over bed: 280 mm | Swing over cross slide: 165 mm
Discover moreROGI TRADING WMP 290 V - F
Belgium
- Centre height
- 140 mm
- Swing over bed
- 280 mm
- Swing over cross slide
- 165 mm
- Distance between centres
- 700 mm
CNC Milling machine *Information can sometimes be inaccurate and change without notice! Made in: Spain
Discover more
Universal Milling Machine *Information can sometimes be inaccurate and change without notice! Made in: Germany
Discover moreMAHO MH 400 P
Netherlands
- Made in
- Germany
- Vertical clamping surface
- 800 x 200 mm
- Working area along X
- 400 mm
- Working area vertical Y
- 375 mm
Universal Milling Machine
More info:
Machines in good condition - Used
Support for vertical he...
Discover moreHUVEMA FNA14
Netherlands
- Voltage
- 400 V
- Recording
- ISO40
- Drilling pinole
- stroke 80 mm
- Range xyz
- approx. 350 mm
CNC Vertical Milling Machine Center
More info:
Cooling through the spindle
Air through the spi...
Discover moreHYUNDAI KIA VX500
Netherlands
- Control Unit
- Fanuc 21i-MB
- Spindle speed
- 10000 rpm
- Tool magazine
- 30 pos
- Holder mounting
- BT40
Horizontal Borers - Year: 1961
More info:
Extra tools available.
The boring machine has been o...
Discover moreWOTAN B 130 S
Netherlands
- Made in
- Germany
- Clamping plate
- Around 1200 mm
- Stroke X-Y-Z
- 2500 x 2000 x 1600 mm
- Spindle speed
- 0.8 - 1000 rpm
Milling Machine
More info:
Collet chuck
Clamping holders
Large face milling cutter with inter...
Discover more
Milling Machine
More info:
Complete with many accessories
*Information can sometimes be inaccu...
Discover more
Horizontal Borers - Year: 1985
More info:
Extra tools available.
A gasket from the table is le...
Discover moreMOCKBA GCO 2A622-1
Netherlands
- Made in
- USRR
- Clamping plate
- Around 1000 mm
- Stroke X-Y-Z
- 2000 x 1000 x 1000 mm
- Spindle speed
- 1100 rpm
CNC Milling Machine More info: Including tool changer Made in: Taiwan | Table size: 850 x 410 mm | X-axis:...
Discover more
CNC Bed Milling Machine More info: Chip conveyor Tool changer for 24 tools Made in: Netherlands | Control Un...
Discover moreKIHEUN U1000 - Bed Milling Machine
Netherlands
- Made in
- Netherlands
- Control Unit
- HEIDENHAIN
- X-axis
- 4100 mm
- Y-axis
- 1250 mm
Universal Milling Machine More info: Retrofitted to contemporary cnc control using Eding cnc cont...
Discover moreMAHO MH-C 900
Netherlands
- Control Unit
- Computer Controlled (CNC)
- X-travel
- 1000 mm
- Y-travel
- 650 mm
- Z-travel
- 500 mm
Universal Milling Machine More info: Incl + -40 tool holders Complete with documentation, both on...
Discover more
Milling Machine More info: The machine is equipped with digital readout and automatic power suppl...
Discover moreHBM 50 Profi Vario DRO
Netherlands
- Max. drilling capacity in steel
- 30 mm
- Max. milling capacity in steel
- 30 mm
- Max. sheath milling capacity
- 100 mm
- Spindle stroke
- 120 mm
TOS FGSH 50 - Milling Made in: Czech / Slovakia | X-axis: 1400 mm | Y-axis: 630 mm | Z-axis: 500 mm | Table ...
Discover moreOthers
Explore this used Tecnopromec Alfa C industrial metalworking machine, manufactured in 1997, locat...
Discover moreTecnopromec Alfa C I Profiling Line I 1997
Netherlands
- Made in
- Italy
- Absorption
- 176 A
- Total power
- 95 kW
- Power supply
- 380/50 V/Hz
Presses
Metalworking - Press Brake
Used Ermak industrial machinery – AP 3600 x 200 from 2005 located in ...
Discover moreErmak AP 3600 x 200 - Press Brake - 2005
Netherlands
- Made in
- Turkey
- Pressing force
- 200 Ton
- Bending length
- 3600 mm
- Passage between uprights
- 3050 mm
Metalworking - Punching Machine
Used Boschert industrial machinery – EL 1000 CNC from 2000 locat...
Discover moreBoschert EL 1000 CNC - Punching Machine - 2000
Netherlands
- Made in
- Germany
- Punching force
- 28 Ton
- Table length
- 1000 mm
- Table width
- 2000 mm
Metalworking - Punching Machine
Used Euromac industrial machinery – ZX 1250/30 from 2001 located...
Discover moreEuromac ZX 1250/30 - Punching Machine - 2001
Portugal
- Made in
- Italy
- Punching force
- 30 Ton
- X-Axis travel
- 2000 mm
- Y-Axis travel
- 1250 mm
Metalworking - Punching Machine
Used LVD industrial machinery – Strippit Alpha 1012 from 2003 lo...
Discover moreLVD Strippit Alpha 1012 - Punching Machine - 2003
Netherlands
- Made in
- Belgium
- Punching force
- 30 Ton
- Table length
- 1250 mm
- Table width
- 1000 mm
Metalworking - Punching Machine
Used Trumpf industrial machinery – Trumatic 500 from 1997 locate...
Discover moreTrumpf Trumatic 500 - Punching Machine - 1997
Germany
- Made in
- Germany
- Punching force
- 22 Ton
- Sheet length
- 2500 mm
- Sheet width
- 1300 mm
Metalworking - Punching Machine
Used Murata Wiedemann industrial machinery – Centrum 2500 from 1...
Discover moreMurata Wiedemann Centrum 2500 - Punching Machine - 1999
Netherlands
- Made in
- Japan
- Control unit
- Fanuc series O-P
- Punching force
- 20 Ton
- Working area
- 2500 x 1250 mm
Metalworking - Punching Machine
Used Edel industrial machinery – Stanzmaster 407 from 1988 locat...
Discover moreEdel Stanzmaster 407 - Punching Machine - 1988
Switzerland
- Made in
- Germany
- Punching force
- 40 Ton
- Throat
- 700 mm
- Table length
- 3200 mm
Metalworking - Punching Machine
Used Trumpf industrial machinery – Trumatic 200 from 1998 locate...
Discover moreTrumpf Trumatic 200 - Punching Machine - 1998
Germany
- Made in
- Germany
- Control unit
- Trumagraph CC220
- X-Axis travel
- 2070 mm
- Y-Axis travel
- 1280 mm
Metalworking - Punching Machine
Used Trumpf industrial machinery – Trumatic 240R from 1991 locat...
Discover moreTrumpf Trumatic 240R - Punching Machine - 1991
Spain
- Made in
- Germany
- Control unit
- Bosch Trumagraph CC300
- Punching force
- 250 kN
- X-Axis travel
- 2000 mm
Metalworking - Punching Machine
Used Amada – Vipros 358 located in Spain. This punching machine ...
Discover moreAmada Vipros 358 - Punching Machine
Spain
- Control unit
- FANUC-CNC
- X-axis travel
- 2000 mm
- Y-axis travel
- 1270 mm
- Max. punching force
- 30 Tons
Metalworking - Punching Machine
Used Trumpf industrial machinery – TC 5000 R - 1600 from 2005 lo...
Discover moreTrumpf TC 5000 R - 1600 - Punching Machine - 2005
Slovakia
- Made in
- Germany
- Control unit
- Sinumerik 840D
- Punching force
- 22 Ton
- Sheet length
- 3085 mm
Metalworking - Punching
Used Trumpf Punching Machine Trumatic 2000R Used metal machinery in good...
Discover moreTrumpf Trumatic 2000R - Punching Machine - 2001
Spain
- Made in
- Germany
- Control unit
- Bosch type 3
- Axis- X Punching Mode
- 2.500 mm
- Axis - Y Punching Mode
- 1.250 mm
Metalworking - CNC punching
Used Amada – EMZ 3510 from 2012 is made in France, with Working hour...
Discover moreAmada EMZ 3510 - CNC punching - 2012
Poland
- Made in
- France
- Control unit
- FANUC AMNC - WINDOWS
- Working hours
- 41 930 h
- Punching force
- 30 t
Metalworking - Punching Machine
Used Amada – Vipros 2510 K from 1998 is made in Japan, with Punc...
Discover moreAmada Vipros 2510K - Punching Machine - 1998
Italy
- Made in
- Japan
- Control unit
- Fanuc series 18-p
- X-axis travel
- 2.500 mm
- Y-axis travel
- 1.270 mm
Metalworking - Punching Machine
Used Trumpf – Trumatic 500 from 2005 located in Spain. This punc...
Discover moreTrumpf Trumatic 500 - Punching Machine - 2005
Spain
- Control unit
- TRUMAGRAPH CC 220
- Work field without repositioning
- 1270 x 2080 mm
- Work field with single repositioning
- 1270 x 2500 mm
- Power max. Punching
- 150 KN
Metalworking - Punching
Used Kingsland – 60 compact from 2021 is made in Norwegian. This Punchin...
Discover moreKingsland 60 compact - Punching - 2021
Belgium
- Made in
- Norwegian
- Max capacity
- 30 x 15mm
- Diameter x thickness
- 38 x 12mm
- Stroke length
- 55 mm
Metalworking - Punching Machine
Used Amada – Vipros 368 king from 2001 located in France. This p...
Discover moreAmada vipros 368 king - Punching machine - 2001
France
- Control unit
- Fanuc
- Punching force
- 300 kN
- Axis traverse distance
- 1525 x 2000 mm
- Workable max. sheet size
- 1525 x 4000 mm
Metalworking - Punching machine
Used Trumatic – Punching machine – 500R Used metal machinery in ...
Discover moreTrumpf Trumatic 500R - Punching machine - 2001
France
- Made in
- Germany
- Control Unit
- BOSCH CC 220 S
- Max working area
- 2.500 x 1.300 mm
- Max punch diameter
- 76.2 mm
Punch press machine - Year: 1999
___
* Please note that this description may have b...
Discover moreFINNPOWER SG 6 - Punch press - 1999
Finland
- Working hours
- 26.000 H
- Control Unit
- Sinumerik 840D
- X-Axis travel
- 2584 mm
- Y-Axis travel
- 1560 mm
Metalworking - Punching machine
____
* Please note that this description may have been translat...
Discover moreAmada Arcade 210 - Punching machine - 2010
France
- Metal length
- 2450 mm
- Metal width
- 1000 mm
- Steel thickness
- 6.4 mm
- Workpiece weight
- 100 Kg
Metalworking - Punching Machine
More info:
Machine with tools included
___
* Please note that...
Discover moreLVD Delta 1250 - Punching Machine - 1997
France
- Control Unit
- DynaPath
- Capacity
- 20 T
- Thickness Steel
- 6.4 mm
- Sheet weight
- 150 KG
Metalworking - Punching machine
More info:
Machine without tools
____
* Please note that this...
Discover moreLVD Delta 1500 LB TK - Punching machine - 1998
France
- Sheet width
- 1550 mm
- Plate length
- 2525 mm
- Plate thickness
- 6,4 mm
- Punching capacity
- 200 kN
Metalworking - Punching Machine
More info:
Punching machine with 2 index D stations
___
* Ple...
Discover moreLvd Delta 1000 - Punching Machine - 1994
Netherlands
- Control unit
- LVD
- Punches
- 6.4 mm
- Punching capacity
- 20 T
- Tools
- 20
Punching machine - Year: 1996
More info:
Punching machine 30 tons and with a depth of 750 mm. S...
Discover moreEUROMAC CX 750/30 CNC - 1996
Netherlands
- Control Unit
- Euromac CNC controller
- Punching capacity
- 30 T
- X-Working range
- 1250 mm
- Y-Working range
- 750 mm
CNC Punching machine - Year: 1989
More info:
Machine with several tools included, complete mach...
Discover moreTrumpf MINIMATIC 100 MICRO - CNC Punching - 1989
Portugal
- Made in
- Germany
- Control unit
- SIEMENS Sinumerik 3S
- Cutting diameter
- 38 mm
- Cutting force
- 150 kN
Punch press - Year: 1997
More info:
Machine with Opticam and tools included
____
* P...
Discover more1997 Finnpower A5 20SB
Finland
- Working hours
- 18.743 H
- Control Unit
- Siemens 840 D
- Punching power
- 230 KN - 30 Tns
- Sheet size
- 2530 x 1270 mm
Metalworking - Press Brake
Used LVD – PPBL 135 - 30 from 1998 made in Belgium located in Belgium...
Discover moreLVD PPBL 135 - 30 - Press Brake - 1998
Belgium
- Made in
- Belgium
- Control unit
- LVD MNC 85
- Force
- 1350 kN
- Working length
- 3050 mm
Punching Machine - Year: 2006
More info:
Including stamps
___
* Please note that this descrip...
Discover moreMubea HIW 750/510 - Punching - 2006
Belgium
- Made in
- Germany
- Punching capacity
- 80T
- Punching diameter
- 30 x 22 mm
- Cutting length
- 317 mm
Metalworking - Punching Machine
More info:
Machine with double hydraulic cylinder and 2 foot pe...
Discover moreKingsland Haco Multi 95 - Punching Machine
Belgium
- Punching hole max thickness
- 27 mm diameter x 25 mm thickness
- Punching hole max diameter
- 57 mm x 12 mm thickness
- Cutting flat iron max thickness
- W 380 mm x 20 mm thickness
- Cutting flat iron max. Width
- 480 mm x 15 mm thick
Punching Machine Made in: Germany | Operating pressure: 250 Bar | Punching: 31 mm | Sheet metal: 10 mm
Discover morePEDDINGHAUS Peddicat
Belgium
- Made in
- Germany
- Operating pressure
- 250 Bar
- Punching
- 31 mm
- Sheet metal
- 10 mm